RU UA
Новости компании Новости производителей О компании Поставщики Вакансии Контакты
Электронные компоненты
Техническая документация
Публикации
Оборудование
Новые предложения и акции
 
MR-DOA4
The Modbus module with 4 digital outputs was developed for decentralized switching tasks. It is suitable for switching electrical components, such as motors, contactors, lamps, louvers, etc. With strong inductive loads, we recommend protecting the relay contacts additionally with an RC element. The module is provided with a manual control for manually switching the relays. The outputs can be switched by means of standard objects via a Modbus master. The module address, the baud rate and the parity are set by means of two address switches on the front. Suitable for decentralized mounting in serial sub-distributor.

Protocol - Modbus RTU
Addressing range - 00 to 99
Bus interface - RS485 (two-wire bus)
Transmission rate - 1200 to 115200 baud
Operating voltage range - 20 V to 28 V AC/DC (SELV)
Current consumption - 200 mA (AC) / 70 mA (DC)
Relative duty cycle - 100%
Output / contacts - 4 changeover contacts (4 DPST)
Output / switching voltage - 250 V AC
Output / continuous current - 5 A / output
Output / switching frequency - 360 cycles/h
Display - Green, red and yellow LED
Dimensions (W x H x D) - 35 x 70 x 75 mm
Weight - 95 g
Operating temperature range - (-5 °C to +55 °C)
Storage temperature range - (-20 °C to +70 °C)
Ingress protection for housing / terminal block - IP40 / IP20

Technical Data
P/N - 110836132101
Color - gray
Feature 1 - 4x OUT (relay CO)
Feature 2
EAN-No - 4250184158745




Рейтинг@Mail.ru