The Modbus module with 4 analog outputs was developed for decentralized switching tasks. It is suitable as encoder for control variables, for example for electrical vent and mixing valves, valve positions, etc. The outputs can be output by means of standard objects via a Modbus master. Each output can be set for automatic or manual operation by means of 4 potentiometers at the front. The module address, the baud rate and the parity are set by means of two address switches on the front. Suitable for decentralized mounting in serial sub-distributor.
Protocol - Modbus RTU
Addressing range - 00 to 99
Bus interface - RS485 (two-wire bus)
Transmission rate - 1200 to 115200 baud
Operating voltage range - 20 V to 28 V AC/DC (SELV)
Current consumption - 50 mA (AC) / 20 mA (AC)
Relative duty cycle - 100%
Outputs - 4 x analog
Output / voltage - 0 V to 10 V DC
Output / current - 5 mA at 10 V DC
Output / resolution - 10 mV / digit
Display - Green and red LED
Dimensions (W x H x D) - 35 x 70 x 65 mm
Weight - 72 g
Operating temperature range - (-5 °C to +55 °C)
Storage temperature range - (-20 °C to +70 °C)
Ingress protection for housing / terminal block - IP40 / IP20
Technical Data
P/N - 1108371302
Color - gray
Feature 1 - 4x OUT (U)
Feature 2 - manual/automatic
EAN-No - 4250184151920